rohs compliant 250 vdc, 125 vac 0.1C1.0 f 20% 22 C 680 ? 30% 375 v C40 to +85c 40/085/56/b the series resistance is defned at 1 khz for rc 50 s and at 100 khz for rc < 50 s. 3000 m? for c 0.33 f 1000 s for c > 0.33 f measured at 100 vdc after 60 s, +23c the average losses may reach 0.5 w provided the surface temperature does not exceed + 85c. for maximum permitted power dissipation v temperature, see derating curves. curve dimensions 1 b = 5.2 2 b = 7.3 2 b = 7.8 3 b = 7.6 4 b = 9.0 5 b = 11.3 pmr205 ? rc unit, metallized paper with integrated resistor ? 0.1 C 1.0 f , 22 - 680 ? , 125 vac, +85 c typical applic ations construction technical data rc unit for use in dc and ac applications for: C contact protection C interference suppression of contacts C transient suppression single layer metallized paper. encapsulated and impregnated in self- extinguishing material meeting the requirements of ul 94v-0. the resistance in the metal layer is utilized as series resistance, integrated resistor. rated voltage capacitance range capacitance tolerance resistance range resistance tolerance peak pulse voltage t emperature range climatic category s eries resistance i nsulation resistance power ratings en v i r onm e nta l t e st data v ibration iec 60068-2-6, test fc 3 directions at 2 hour each no visible damage, no open or short circuit 10 C 500 hz at 0.75 mm or 98 m/s 2 bump iec 60068-2-29, test eb 4000 bumps at 390 m/s 2 no visible damage, no open or short circuit s olderability iec 60068-2-20, test ta solder globule method wetting time < 1 s h umidity iec 60068-2-3, test ca +40c and 90 C 95% r.h. 56 days ? small dimensions ? high du/dt capability. ? excellent self-healing properties. ensures long life even when subjected to frequent overvoltages. ? self-extinguishing encapsulation. ? good resistance to ionisation due to impregnated dielectric. ? the impregnated paper ensures excellent stability giving outstanding reliability properties, especially in applications having continuous operation. l h b p 0.5 l ? 0.8 l: standard: 30 +5/-0 mm (code r30) option 1: short leads, tolerance +0/-1 mm (standard 6 mm, code r06) other lead lengths on request option 2: 30 mm insulated solid leads, ordering code: replace r30 with r300ps in std p/n c r 40 t amb 50 60 70 80 85 c 0.5 p max w 0 1 2 3 maximum allowable power dissipation vs ambient temperature and case sizes. 4 5 statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applic ations, but are not intended to constitute and we specifically disclaim any warranty concerning suitabi lity for a specific customer application or use. this information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice in ferred from this inform ation or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the ad vice given or results obtained.
8 evox rifa leaded film capacitors pmr205 ordering infor mation marking ? rifa ? rifa article code ? rc unit ? rated capacitance and resistance ? rated voltage ? mp, for metallized paper ? climatic category according to iec 60068-1, appendix a ? passive fammability class ? circuit diagram ? manufacturing code (year, month) ar ticle table capaci- resis- max dimensions in mm quantity per package w eight article code tance tance r30 r06 reel taped f ? b h l p pcs pcs pcs g 0.10 33 5.2 10.5 18.5 15.2 500 1000 600 1.7 pmr205ab6100m033r30 0.10 47 5.2 10.5 18.5 15.2 500 1000 600 1.7 pmr205ab6100m047r30 0.10 100 5.2 10.5 18.5 15.2 500 1000 600 1.7 pmr205ab6100m100r30 0.10 220 5.2 10.5 18.5 15.2 500 1000 600 1.7 pmr205ab6100m220r30 0.15 68 5.2 10.5 18.5 15.2 500 1000 600 1.7 pmr205ab6150m068r30 0.15 100 5.2 10.5 18.5 15.2 500 1000 600 1.7 pmr205ab6150m100r30 0.22 47 7.3 13.0 18.5 15.2 400 800 400 3.0 pmr205ab6220m047r30 0.22 100 7.3 13.0 18.5 15.2 400 800 400 3.0 pmr205ab6220m100r30 0.22 220 7.3 13.0 18.5 15.2 400 800 400 3.0 pmr205ab6220m220r30 0.22 330 7.3 13.0 18.5 15.2 400 800 400 3.0 PMR205AB6220M330R30 0.22 470 7.3 13.0 18.5 15.2 400 800 400 3.0 pmr205ab6220m470r30 0.25 200 7.3 13.0 18.5 15.2 400 800 400 3.0 pmr205ab6250m200r30 0.25 350 7.3 13.0 18.5 15.2 400 800 400 3.0 pmr205ab6250m350r30 0.25 600 7.3 13.0 18.5 15.2 400 800 400 3.0 pmr205ab6250m600r30 0.33 47 7.8 13.5 18.5 15.2 400 800 400 3.3 pmr205ab6330m047r30 0.47 22 7.6 14.0 24.0 20.3 250 1500 250 4.0 pmr205ac6470m022r30 0.47 33 7.6 14.0 24.0 20.3 250 1500 250 4.0 pmr205ac6470m033r30 0.47 47 7.6 14.0 24.0 20.3 250 1500 250 4.0 pmr205ac6470m047r30 0.47 68 7.6 14.0 24.0 20.3 250 1500 250 4.0 pmr205ac6470m068r30 0.47 100 7.6 14.0 24.0 20.3 250 1500 250 4.0 pmr205ac6470m100r30 0.47 150 7.6 14.0 24.0 20.3 250 1500 250 4.0 pmr205ac6470m150r30 0.47 220 7.6 14.0 24.0 20.3 250 1500 250 4.0 pmr205ac6470m220r30 0.47 330 7.6 14.0 24.0 20.3 250 1500 250 4.0 pmr205ac6470m330r30 0.47 470 9.0 15.0 24.0 20.3 200 1200 250 5.0 pmr205ac6470m470r30 0.47 680 11.3 16.5 24.0 20.3 150 1000 180 7.0 pmr205ac6470m680r30 1.0 33 10.6 16.1 30.5 25.4 150 1000 8.6 pmr205ae7100m033r30 1.0 47 11.3 16.5 24.0 20.3 150 1000 7.0 pmr205ac7100m047r30 1.0 68 11.3 16.5 24.0 20.3 150 1000 7.0 pmr205ac7100m068r30 1.0 100 11.3 16.5 24.0 20.3 150 1000 7.0 pmr205ac7100m100r30 1.0 150 11.3 16.5 24.0 20.3 150 1000 7.0 pmr205ac7100m150r30 1.0 220 11.3 16.5 24.0 20.3 150 1000 7.0 pmr205ac7100m220r30 the article code for the standard part is given in the article table. for other options, see page 11. statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applic ations, but are not intended to constitute and we specifically disclaim any warranty concerning suitabi lity for a specific customer application or use. this information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice in ferred from this inform ation or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the ad vice given or results obtained.
|
